Specifications

Reference Lines
Toggle this softkey to enable reference lines, which are useful for placing
screen objects precisely. The position values default to 0 for the exact
center of the screen. Position values align with the grid overlay pattern;
integer position values coincide with the fixed lines in the grid. You can
select the following combinations of reference lines:
Horizontal enables two horizontal lines, with Bottom Line Position and
Top Line Position pushknobs. The lines cannot exchange positions; if
one line meets the other, it "pushes" it along with it.
Vertical enables two vertical lines, with Left Line Position and Right
Line Position pushknobs. The lines cannot exchange positions; if one
line meets the other, it "pushes" it along with it.
Toggling to Both enables one horizontal and one vertical line, with H
Position and V Position pushknobs.
NOTE: If the Crosshair or Box Cursor is turned on, the
Reference Lines are not visible.
Cursor
Toggle this softkey to turn on the movable (color pick) crosshair or box.
This overlay uses the same circuitry as the reference lines, so if the
Crosshair or Box is turned on, the reference lines are not visible.
Cursor & Ref Line Color
Toggle this softkey to set the color pick cursor color to White, Black, or
Xor. If you select Xor (the default), the cursor automatically changes to
black or white according to the luminance level of the video over which
it is superimposed.
Personality Menu 8150 Technical Guide
5-44
Engineering Setup
9100-0212-04 - May 2000