Specifications

Remote Port Enables Submenu
This submenu lets you enable and disable the remote ports. See the
Installation section for more information on setting up these ports.
Port 1
Toggle this softkey to enable/disable the port marked "SERIAL 1" on the
back of the Signal Chassis. On is the default.
Port 2
Toggle this softkey to enable/disable the port marked "SERIAL 2" on the
back of the Signal Chassis. On is the default.
Port 3
Toggle this softkey to enable/disable the port marked "SERIAL 3
(LINC)" on the back of the Signal Chassis. On is the default.
GPIs
Toggle this softkey to enable/disable the GPIs (input triggers). Off is the
default.
GPOs
Toggle this softkey to enable/disable the GPOs (output triggers). Off is
the default.
Personality Menu
Figure 5-13 The Remote Port Enables Submenu
Personality Menu 8150 Technical Guide
5-42
Engineering Setup
9100-0212-04 - May 2000