Specifications

Input Assign Submenu
The Input Assign submenu displays the bus crosspoint assignments and
lets you set which sources appear at which crosspoint buttons.
This menu shows two bus rows of nine boxes that represent the
crosspoint buttons on the Control Panel. The top row represents the
primary crosspoints (1 – 9), and the bottom row represents the shifted
crosspoints (10 – 18). Above the boxes are the sources currently assigned
to the buttons, including the input names assigned in the Input Names
submenu. The black box indicates the currently selected crosspoint
button on the BKGND B or PRESET bus row.
Assigning Sources to Crosspoints
STEP 1: Press the Input Assign softkey to open this submenu. Select
the crosspoint button you want to assign a source to on the
BKGND B or PRESET bus row. The black box in the menu
indicates that crosspoint.
STEP 2: Use the Source pushknob to select the source you want to
assign to that crosspoint. You can choose any of the external
or internal sources available in the 8150.
STEP 3: Press the Assign softkey to assign the source to the selected
crosspoint.
Keypad
Personality Menu
Figure 5-10 The Input Assign Submenu
Personality Menu 8150 Technical Guide
5-30
Engineering Setup
9100-0212-04 - May 2000