Specifications

Use the Cursor pushknob to move the cursor into the naming box (if you
do not have an external PC AT keyboard to name the inputs). Turn the
Cursor pushknob to move the cursor in the naming box (above the
pushknob label); push it to backspace (with delete) through the name.
Turn the Character pushknob to scroll through the character set. Press
the pushknob to enter the character at the current cursor position.
If there is already a name in the naming box, clear it by pressing CLEAR
(in the numeric keypad), then the Character pushknob. This leaves the
letter A in the box, since valid file names must have at least one character.
You can enter numbers in file names with the numeric keypad.
Current Selection
Press this softkey to copy the current input name from the list to the
naming box. This lets you easily edit existing names.
Name
Press this softkey to assign the name in the naming box to the current
input.
8150 Technical Guide Personality Menu
9100-0212-04 - May 2000
Engineering Setup
5-29