Specifications

Lamp Saver
This softkey sets the delay (time out) for the Lamp Saver feature. If there
is no Control Panel activity (no button presses or fader bar or joystick
movement) for the specified duration, the system shuts off the
incandescent lamps and LEDs in the Control Panel buttons. Set the delay
in minutes with the Timeout pushknob. The range is 1 minute to 60
minutes; 10 minutes is the default.
The LCD menu display is always active, and is not affected by the Lamp
Saver function.
8150 Technical Guide Engineering Menu
9100-0212-04 - May 2000
Engineering Setup
5-23