Specifications

Miscellaneous Submenu
Press this softkey to bring up the Miscellaneous submenu, which lets
you select the line standards, aspect ratio, lamp saver delay, and Aux
output usage if the DVE board is installed.
Video Standard
Toggle this softkey to select the 525-line or 625-line standard for the
system.
NOTE: The 8150 requires a black burst or composite sync
reference signal at the selected line standard to operate
properly.
Aspect Ratio
Toggle this softkey to select 4:3 or 16:9 aspect ratio processing for the
system. 4:3 is the default; 16:9 changes aspect ratio calculations only and
should be used when working with video intended to have a 16:9 aspect
ratio.
NOTE: The 8150 processes only component digital video
with luma and chroma sampled at 13.5MHz and 6.75MHz
respectively. Some 16:9 component digital video formats
have luma and chroma sampled at 18MHz and 9MHz
respectively. The 8150 can neither input nor output digital
video sampled at this rate; the 16:9 selection changes aspect
ratio calculations only.
Keypad
Engineering Menu
Figure 5-6 The Miscellaneous Submenu
Engineering Menu 8150 Technical Guide
5-18
Engineering Setup
9100-0212-04 - May 2000