Specifications

Proc Adjust (Gain/Pedstl)
Press this softkey to access controls for adjusting levels for the analog
key input.
Use Key Gain to adjust the level of the key input. The range is –50 to
+150 percent of nominal. Use Pedestal to adjust the black offset of the
key input. The default setting of 0.00 assumes that the black level of the
incoming composite video is 0mV or 0IRE for either line standard. The
range of this control is +/– 10 percent.
More Proc Adjust (H Phase/Ofs)
Press this softkey to access the H Phase pushknob, which adjusts the
horizontal position of the active key signal relative to sync. This control
has a range of +/– 1000 nanoseconds (+/– 1 microsecond).
8150 Technical Guide Engineering Menu
9100-0212-04 - May 2000
Engineering Setup
5-13