Specifications

Section 5
Engineering
Setup
You can set most of the 8150 engineering parameters with the Control
Panel. This makes 8150 setups easier to make and recall, since there is
no need for time consuming manual adjustments in the Signal Chassis.
Introduction
This section covers the three menus that control engineering and other
technical setups. The Engineering menu controls the remote control port
setups, video input and output parameters, and software updates. The
Personality menu controls the source name and crosspoint assignment
databases, as well as the function (macro) buttons, input GPI
assignments, remote port enables, and preview monitor overlays (safe
title, safe action, etc.). The Disk menu controls all floppy disk functions,
including saving and recalling files to and from disk, deleting files, and
formatting disks.
This section also includes procedures for removing and replacing major
assemblies in the Signal Chassis, including the power supply, backup
battery, and cooling fans. There are also disassembly instructions for the
Control Panel you can use if you need to access the assemblies inside it.
8150 Technical Guide Introduction
9100-0212-04 - May 2000
Engineering Setup
5-1