Specifications

Menu Screen Layout & Controls
Menu Display
You can adjust the menu display LCD brightness and contrast with the
two thumbwheels set into the left side of the Control Panel.
Submenu Labels and Controls
A top level menu can have up to six submenu labels, shown on the right
side of the menu screen. Bring up a submenu by pressing the softkey
next to its label. As you press a submenu softkey, a black drop shadow
appears to indicate that the submenu is active. The submenu controls
(parameters and flags) appear on the left side of the menu screen.
Pressing a submenu softkey does not change or clear any switcher
settings.
Press a parameter/flag softkey on the left side of the menu display to
select a control or toggle a flag or function. As you press a softkey, a
black drop shadow appears to indicate that you have selected that
control. When you press a softkey, up to four settings for that function
appear at the bottom of the menu screen. You can adjust these settings
with the pushknobs, or with the joystick if the arrow icon appears. The
keypad buffer is always present in the lower right corner of the menu
display.
Menu Header
Submenu
Submenu
Submenu
Submenu
Submenu
Submenu
Knob 1 Label Knob 2 Label Knob 3 Label Knob 4 Label
Knob Label 3
Value Value Value Value Value
Func label
Function
Function
Function
Func label
Function
Function
Function
Function
Func label
Function
Function
Function
Function
Func label
Function
Function
Function
Function
Func label
Function
Function
Function
Function
Func label
Function
Function
Function
Function
Keypad
{number}
Function
Submenu
Softkeys
Submenu Controls Submenu Labels
Parameter/Flag
Softkeys
Numeric Keypad
Buffer
Pushknobs
12
3
4
Figure 4-10 The Menu Screen & Controls
Control Panel 8150 Technical Guide
4-16
System Overview
9100-0212-04 - May 2000