Specifications

STEP 11: When the unit boots up, press the DISK menu button to
access the Disk menu. Toggle the Drive softkey to Hard Drv.
The status box message should be <no files>. The prompt
under the central status box should read:
path: C:
disk size: 1079736800
[approximately]
disk free: 1079736800
[approximately]
Since the hard drive is initialized and formatted at the factory, it is ready
for use. You can save and recall files to this disk drive just like the floppy
drive. This includes image files, and the drive can save and recall full
frames of video (YUV and Y10 files) in about three seconds. See Section
11 – Disk Operations in the 8150 Operations Manual for information on
creating subdirectories and saving files to the hard drive.
HARD DRIVE
REAR BOARD
CARD CAGE
RAM
BATTERY
BACKUP
POWER SUPPLY UNIT
(PSU)
PSU
MOUNTING TRAY
REAR BOARD
CARD CAGE
F
A
N
F
A
N
SIGNAL CHASSIS - TOP INTERNAL VIEW
Figure 3-16 8150 Signal Chassis
8150 Technical Guide Option Installation
9100-0212-04 - May 2000
Option Installation
3-29