User manual

In the connection diagram, both the Wireless and wired options are

shown. Only one of these is required. If you are using the wired

Ethernet connection on the front of the Ethernet Adapter, the

antenna is not required and can be removed. Alternatively, if the

wireless Ethernet connection is being used, the wired connection to

the front of the Ethernet Adapter is not required.

The power adapter as shown in this diagram is only necessary if

the Ethernet Adapter is more than a few feet away from the CS3500

controller. The Ethernet Adapter can draw power from the CS3500

controller if the cable losses are not significant. The Ethernet Adapter

package includes a 3-foot serial cable that is capable of providing

adequate power without the power adapter.