User manual

Installation

Before the Ethernet adapter is installed, it should be configured to

operate on the local area network where it will be installed. Please

complete the section “Configuring the Ethernet Adapter” before

continuing.

Choosing a location

The Ethernet Adapter is not suited for outdoor installation unless

it is protected by another enclosure. The Ethernet Adapter should be

installed indoors, inside the CS3500 controller enclosure (wired option

only), or inside a weatherproof cabinet. If the distance between the

controller and the Ethernet adapter is greater than a few feet, then

the power adapter may be required, otherwise the Ethernet adapter

can draw its power from the controller. If you are using the wireless

capability of the Ethernet adapter, the antenna must be free from any