Installation guide

Repairing the Database
On rare occasions, Irrigation Manager may behave incorrectly. This might include errors during synchronization or not being able
to graph data that has been downloaded. This is not a problem with the controller but is typically caused by internal database
storage problems on the PC. It can often be easily fixed with no loss of data.
1. Close Irrigation Manager. It cannot be running since it uses the database that needs to be repaired.
2. Open the windows start menu.
3. Select the “Acclima” menu.
4. If running Windows XP, click on “DB Repair”. If running Windows Vista or Windows 7, right click on “DB Repair” and
select “Run as Administrator”.
5. Two small windows will appear showing the progress of the repair.
6. These windows will close when the repair is complete and you can open Irrigation Manager.