Installation guide

The controller stores the raw data from sensors, flow meters, pressure meters, and other installed devices. It also stores system
error information and watering cycle information.
The logs are viewed by selecting the “View > Controller Logs…” menu.
Irrigation Manager displays three types of logs:
1. Sensor Logs - displays all sensor measurement readings that have been
downloaded from the controller.
2. Error Logs - displays all errors that have occurred on the controller.
3. Watering Logs - displays all automatic and manual watering activity.
Click on the tabs near the top of the screen to move between the three log types.
Viewing only selected Data
You can limit the amount of data displayed by specifying a filter. Each column can be filtered. To specify a filter, click on the
down arrow button in the column header and select the item to display.
Sorting Data
To sort data in each column, click anywhere on the blue column header. The data will now be sorted by that column
heading. Clicking the header again will sort the column in the reverse order.
Navigating the data logs
The navigation bar is located at the bottom of the screen. Use the arrows in the navigation bar to move around in the grid.
You can also use the arrow keys on your keyboard.
You can also create advanced data filters by selecting the “Filter” button which is the right most icon on the navigation bar.
Sensor Logs
The controller uses Acclima Digital TDT
®
Soil moisture sensors to measure soil moisture content. The sensors also measure and
log soil temperature and soil conductivity. Sensor data can be viewed in the sensor logs window.