Installation guide

3. Specify the “Water-Off Time” by entering the hour, minute and AM/PM. This can also be done with the up/down
arrows.
4. Specify the duration in the “Pause System Watering” section by entering the days, hours and minutes or by using
the up/down arrows. The pause and resume dates and times are displayed in orange.
5. Enter a descriptive name in the “Event Description” box to distinguish the event from other events.
6. Click “Save” to save and close Water-Off Event window.
Delete Scheduled Events
1. Select a pause event by clicking on an event in the calendar view or by selecting a scheduled event in the “Pause
Events” list on the left side of the screen.
2. Click the “Delete” button at the bottom of the “Water-Off Event” window.
3. Close the “Water-Off Event” window.
Water Restrictions
Sensor zones are programmed to water as needed to keep a healthy lawn. However, there are times when the controller should
not be allowed to water. This might include the hottest hours of the day or when local watering restrictions prohibit watering.
These times can be programmed in the “Water Restrictions” screen to prohibit your system from watering during inappropriate
times.
Watering restrictions are divided into profiles and are listed in the “Restriction Name” list. These profiles may be shared by
zones that will be watered similarly. For example, if there is an activity every Friday night, you could create a restriction that
would prohibit watering on Friday nights from 4pm to 10pm. Then you would assign this restriction to the zones where the
activity will take place. Other restrictions might exist to water at the same time but only on the unused zones.
Create and Edit Watering Restrictions
1. Select a restriction from the “Restriction Names” list.
2. Select seasonal restriction. Year-round watering will
water with the same restrictions throughout the entire
year. Seasonal watering is requires a start and end date.
3. Select a “Daily Restriction” by clicking on the red
underlined “everyday” link. Daily restrictions may be set
to everyday, even days, odd days, every other day or up
to every 10
th
day.
4. Hourly restrictions are displayed in the "Hourly
Restriction" grid and may be set for half hour intervals
throughout each day of the week. Changes may be made
by clicking a half hour block or by dragging the mouse
across consecutive blocks. A green block indicates that
watering is allowed. A blue block means that watering is
restricted. Click on any block or range of blocks to toggle
its color and therefore its watering restriction status.
Export, Import and Print Configurations
The configuration of your controller is vital to efficiently managing your irrigation systems. It is important to protect the
configurations you have created. You can export, import and print your controller’s configurations. This is helpful when
replacing controllers.
To export the configuration
1. Select the “Export Configuration” screen.
2. Specify a location to save the configuration.