User guide

Troubleshooting:
I am having trouble pairing the BlueGate to my smartphone, tablet or computer:
-Please make sure BlueGate is in PAIRING MODE. You will notice that the (1) LED indica-
tor will rapidly  ash blue and red when in PAIRING MODE. Please consult the section in
this manual “Pairing the BlueGate to your smartphone, tablet or computer”.
-Please make sure BlueGate is fully charged.
-If your device is asking for a “PIN” or “Code” please enter 0000.
The BlueGate’s cord is too short for me to use with my sound system:
-Please attach the (c) 3.5mm audio coupler to the BlueGate. Next, attach a 3.5mm
extension cable (not included) between your sound system and the BlueGate.
I left the BlueGate to charge, but the LED indicator is not glowing:
-Please make sure that you have connected BlueGate to a powered USB port.
-The (1) LED indicator will turn o once fully charged.
There is no audio coming out of my sound system, even though I have followed
the steps in this manual very carefully:
-Please make sure that the volume is at an audible level on both your Bluetooth audio
device and on your sound system. Audio is independently controlled by each device.
-Check your sound system settings to ensure that you have selected “AUX” or “Line-in”
settings.
-Please check your audio device output settings. It should indicate that it is providing
Bluetooth audio.