Instruction manual

Connect the GOgroove SonaWAVE to Power
When using AC power, connect the small end of the (3) USB power
cable to the USB port ( g. 3) on the back of the GOgroove SonaWAVE
and the other end into the (2) AC power adapter. Insert the (2) AC
power adapter into a wall outlet. Press the Power button ( g. 2-1) to
turn on the GOgroove SonaWAVE. Volume and Power buttons ( g.
2-1) will glow blue to indicate power  ow. When using AAA battery
power, simply insert four AAA batteries into the AAA battery compart-
ment ( g.2-2).
Connect the Audio Device
Insert one end of the (4) 3.5mm audio cable into the AUX port ( g. 3)
on the back of the GOgroove SonaWAVE. Connect the opposite end
of the (4) 3.5mm cable to your audio device ( g. 3).
Choose your Music
You are now ready to play music! Just  nd your favorite music on
your audio device and press “PLAY”. You can adjust the volume with
both your audio device and the Volume buttons ( g. 2-2) on the
GOgroove SonaWAVE.
Operating Instructions:
Playing Music from an iPod® iPad® iPhone®, MP3 Player, Smart-
phone, or other 3.5mm Audio Device
fig. 3
3.5mm audio cable
USB power cable &
AC power adapter
Wall outlet
BACK
Audio device
USBAUX