Instruction manual

- 5 -
Connection
Battery installation
Figure 1 Figure 2 Figure 3
1. Open the battery covers at the back of the speakers by pressing the two catches.(as the
arrow indicates in Figure 1)
2. Place 4 AA batteries(as Figure 2 indicates) in the battery compartments.
3. Close the battery cover by snapping it in place.(See Figure 3.)
Note: 1. During long periods where the speaker is not in use, remove the batteries to
prevent damage from battery leakage.
2. If the sound level of the speaker becomes too low when using battery power,
change the batteries.