Instruction manual

- 4 -
Overview
Installation
● Place the unit on a flat, hard and stable surface.
● If placing it in a cabinet, allow at least 10 cm (4 inches) of clearance from the rear, the top and
each side of the unit for adequate ventilation.
● Do not expose the unit to extreme heat, cold or humidity.
● The GO GROOVE MOVE should not be near water.
● Flame sources, such as lighted candles, should not be placed near the GO GROOVE MOVE.
● The GO GROOVE MOVE should be placed close to its AC Power Source or Wall Outlet so
that it is easily accessible and well ventilated.
Maintenance and care
Your device is a constructed with superior design and craftsmanship, and should be treated with
care. The following suggestions will help you protect your warranty.
● Keep the device dry. Precipitation, humidity, and all types of liquids or moisture can contain
minerals that will corrode electronic circuits. If your device gets wet, allow it to dry completely
before connecting to a power source.
● Do not use or store the device in dusty, dirty areas. Its electronic components can be
damaged.
● Do not store the device in hot areas. High temperatures can shorten the life of electronic
devices and warp or melt certain plastics.
● Do not store the device in cold areas. When the device returns to its normal temperature,
moisture can form inside the device and damage electronic circuit boards.
● Do not drop, knock, or shake the device. Rough handling can break internal circuit boards
and fine mechanics.
● Do not use harsh chemicals, cleaning solvents, or strong detergents to clean the device.
● Do not paint the device. Paint can hinder proper operation.
If the product is not working properly, take it to the nearest authorized service facility for service.