Specifications

Strata CIX670 and CIX1200
Strata CIX670 and CIX1200 Rack Mount
32 Strata CIX General Description 08/14
Strata CIX670 and CIX1200 Rack Mount
The Strata CIX670 and CIX1200 Rack Mount cabinets consist of
a Base cabinet (CRSUB672A) and Expansion cabinets
(CRSUE672A). These cabinets are deeper, narrower, and
designed specifically to fit standard (customer-supplied) 19”
racks (shown right). The cabinets are made of plated sheet metal,
dark gray in color with black cover plates. These cabinets support
the same features as the floor/wall-mountable CIX670 and
CIX1200 cabinets.
A CIX670 system can expand from one to seven cabinets using
the same processors and interface cards as the CIX670 floor/wall-
mountable cabinets. The CIX1200 system can expand from one
to twelve cabinets using the same processors and interface cards
as the CIX1200 floor/wall-mountable cabinets.The power factors
and slot configuration rules are also the same as the floor/wall-
mountable cabinets.
The difference between the floor/wall mount and the rack mount
cabinets is the size for the Base and Expansion cabinets, the
power supply that is installed in the cabinets, and a unique power
strip for rack mount cabinets (BRPSB120A and the 240V
version).
Toshiba does not support mixing the floor/wall-mountable
cabinets with the rack mountable cabinets. The 19 inch-wide rack
and rack screws must be supplied by the dealer. Interface cables
plug into the front of the station and trunk cards and fold under each cabinet to exit the rear of the
cabinets.
Basic Specifications
The following table lists the parts and basic specifications of the CIX1200 Rack Mount Cabinets.
Dimensions of Base (CSRUB672A)
and Expansion (CSRUE672A)
Cabinet
Height: 6U or 10.5 inches (267mm)
Width: 1.58 feet (483mm—with bracket)
Depth: 1.17 feet (358mm)
Weight of Base and Expansion
Cabinet
22.04 lbs. (10 kg)
Power Supply Unit (PSU) BRPSU672A (initially built in) – can also be ordered for spares
19" Rack Installation Dimension IEC297-1 (EIA RS 310-D)
465.1mm (front face screw pitch – width)
Installation Cannot be floor or wall mounted.
Optional Equipment Power Strip Box
1
1. Power strip boxes for floor/wall-mountable cabinets cannot be used for Rack Mount cabinets.
BRPSB120A
BRPSB240A
Reserve Power Battery Distribution Box
2
2. Reserve batteries are connected using the same battery distribution box and battery cables as the CIX670
and CIX1200 floor/wall-mountable cabinets.
BBDB1A
From PSU to Battery Cable PBTC1A-3M
From BBDB to Battery Cable BBTC1A-2.0M
AC240V Power Supply Cord BACL240A