Specifications

Appendix – Specifications
Capacities
Strata CIX General Description 08/14 219
1. SMDI and SMDR may require BSIS serial port or LAN interface.
2. Conference circuits are used dynamically, so the maximum number of simultaneous conferences is affected by the
number of conference members in each conference. The total number of members in simultaneous conferences
cannot exceed the total number of conference circuits. Each conference can have up to eight members. Two CO line
connections do not require a conference circuit.
3. N/A means Not Available
4. DTMF receivers are required for standard touch tone telephones, voice mail integration, Tie, DID and DISA lines.
5. An option BIOU is required for up to four zone page relays and four control relays on the CIX100, CIX200 and
CIX670 processor. One control relay and one 600 ohm page output is provided on board the CIXCIX100 and
CIX200 processor but not the CIX670 processor.
6. On Digital telephones Speaker OCA capacity is determined by 2B channel slot availability and power supply. CIX40
supports Speaker OCA (S-OCA) on IP5000-series and IPT2000-series telephones only and not on digital
telephones. S-OCA requires the DOCA-1A option in DP5000-series digital telephones, but not in IP telephones.
Speaker OCA on IP telephones require an MIPU, LIPU or GIPU, GIPH installed in the Strata CIX. Each IP telephone
with Speaker OCA requires two IP channels on the MIPU / LIPU or GIPU / GIPH but only requires one IP endpoint
license. The IP OCA channel is only used while the S-OCA call is in progress so it can be reserved or shared with
other telephones for S-OCA but cannot be used as a dedicated IP channel for another telephone or Strata Net
channel. DP5008 and IP2000-series telephones do not support Speaker OCA; all other current Toshiba telephones
support S-OCA.
7. Up to 100 Station SD numbers, allocated in increments of 10, can be programmed per station.
8. CIX40 supports only the GVPH voice mail systems internally, and the Stratagy ES externally.
Table 63 Strata CIX1200 and CIX670 Cabinet and Slot Capacities
Cabinets/Slots/Ports
CIX1200
EXP. B
HCTU+HEXBU
CIX1200
EXP. A
HCTU+HEXAU
1
1. The port and cabinet capacity of HCTU/HEXAU is identical to CIX670 BCTU/BEXU, however, the memory ca-
pacity for numerous features has been expanded with the HCTU/HEXAU - for details see the following tables.
CIX1200
BASIC
HCTU
CIX670
Expanded Processor
BCTU + BEXU
CIX670
Basic
Processor
BCTU
Cabinets 1 to 12 1 to 7 1 to 2 1 to 7 1 to 2
Universal slots 8 to 118
2
2. For 8 to 12 cabinet systems, RRCU cards will require up to 3 card slots in a base cabinet stack and
up to three slots in expansion cabinet stack. Up to a system total of six card slots.
8 to 68 8 to 18 8 to 68 8 or 18
Maximum capacity of ports
including Voice Mail ports
(lines + stations)
1152 672 192 672 192