Specifications

Appendix – Specifications
Strata CIX Component Compatibility
Strata CIX General Description 08/14 199
Power Strip CIX40 CIX100 CIX200 CIX670 CIX1200
RPSB2 (120VAC power strip) NC NC NC X X
BPSB240 (240VAC power strip) NC NC NC X X
Battery Cable CIX40 CIX100 CIX200 CIX670 CIX1200
PBTC-3M NC NC NC X X
BBTC1A-2.0M NC NC NC X X
ABTC-3M NC X NC NC NC
Battery Charger CIX40 CIX100 CIX200 CIX670 CIX1200
ABCS1 NC X NC Built-in Built-in
HPFB-6
12
XNCNCNCNC
X= Compatible NC = Not Compatible
1. When the HCTU processor is installed in the base cabinet (CHSUB672A or CRSUB672A), the system is a
Strata CIX1200.
2. When the BCTU processor is installed in the base cabinet (CHSUB672A or CRSUB672A), the system is a
Strata CIX670.
3. If a BIPU-M or BIPU-Q is installed RCOU1A, RCOS1A RDDU1A, RGLU1A, RGLU2A, and two-wire REMU1
cards should not be installed to avoid excessive Echo Return Loss (ERL).
4. The RCOS1A cannot be installed on the RCOU3A. The RCOS3 can be installed on the RCOU1A.
5. BPTU1, RPTU2, BIPU-Q1A, LIPU, or MIPU is required for Strata Net Networking.
6. Compatible with CIX40
7. DKT1000-series telephones do not support continuous DTMF tones.
8. Requires an MIPU / LIPU/LIPS card or MIPU / GIPU / GIPH on CIX40.
9. DP5022-SDM requires LIC-1-DP5022SDM license to operate on the CIX100/200/670/1200 systems.
10.Release 5.1 hardware is required to support the MIPU, GIPU and GCOCIH1A on the CIX40.
11.Refer to “Telephones and Peripherals” on page 45 for numbers of IP5000-series phones supported in the
system.
12.Provides battery with built-in charger.
Table 41 Component Compatibility (continued)