Owner`s manual

AccessLine Communications
Owner’s Manual AccessLine 8-23-11
91
5. Select a speed dial key (from 1 through 9) to assign to the
contact.
6. Press the Add softkey to add the contact to that speed
dial key.
7. The speed dial is immediately applied.
8. Press the Red key to exit.
Note
Note: To call a speed dial entry press the speed dial number
and then press OK ...
Note: In the speed dial screen, to replace an existing entry
select the speed dial entry you want to replace, and press the
Replace softkey. To delete a speed dial key, scroll to the speed
dial you want to delete and press the Delete softkey.
Groups of Contacts
Adding contacts to groups allows you to view pages of entries by
group, simplifying looking people up in a large Contacts List. You
can also assign ring tones to groups of contacts, helping you
identify incoming calls.
Creating a Contact Group
Before you can add a contact to a group, you must create the empty
group. Each group has its own page in the Contacts List accessed
using the right and left navigation keys.
To add a group to your Contacts List do the following.
1. In Idle mode, press OK to display the Main Menu.
2. Select Contacts and press OK
3. Press the Options softkey.
4. Scroll down to select Groups and press OK
5. Press the Options softkey again.
6. Select Add group and press OK
7. Enter the name for your new group, and press OK
8. Press the Yes softkey when prompted to save.
Adding a Contact to a Group
1. In Idle mode, press OK to display the Main Menu.
2. Select Contacts and press OK
3. Select the contact to add to a group and press the Options
softkey.
4. Scroll down to Edit contact and press OK
5. On the Contacts page scroll past the icons to Groups and
press OK