Owner`s manual

AccessLine Communications
Owner’s Manual AccessLine 8-23-11
83
8. Enter the Timeout (number of seconds the phone should
ring before forwarding) and press OK
9. Press the Yes softkey if prompted to Save
10. Press the Red key to go back to the idle menu
Note
By default the On No Answer Forwarding is set to forward to the
extension of the phone (for example if the phone is extension
105, the No Answer Forwarding is set to 105). If you remove No
Answer Forwarding to the phone’s extension, you must
remember reestablish the forwarding to the phone’s extension in
order for your calls to go to voicemail if your phone is not
answered.
Customizing Your Cordless Phone
Entering Text, Numbers, and Symbols
The Cordless Phone interface allows you to perform several options
to customize your phone, some of which require you to enter text
and numbers on the Cordless Phone screen. This section describes
how to enter text and numbers on your phone.
When in an option requiring you to enter or edit text or numbers (for
example when adding contacts to the Contacts List), the following
softkeys display for your use:
The Erase softkey enables you to backspace and erase
character that was just entered.
The Options softkey provides you with the following two options:
Input mode
Insert symbol
Text Input Modes
When you reach a screen requiring text or numerical input, the
Options softkey on the right allows you to switch between different
types of input. Pressing the Options softkey you can choose
between Input mode (for characters) and Insert symbol.
Input Characters:
Input mode allows you to select the format you want to enter text or
numbers. You can select from the following formats for entering
characters:
You can change the case of the letters as required and enable the
numbers (even in the middle of text characters) by pressing the *
key.
To change the text input mode when on a screen that requires you
to enter or edit characters do the following.