Owner`s manual

AccessLine Communications
Owner’s Manual AccessLine 8-23-11
73
Paging (Intercom)
From any Cordless Phone, you may initiate a page which allows
you to broadcast to all other Cordless Phones and Desk Phones
Initiating a Page
1. In Idle mode, dial the paging group number (all page is
group 9100)
2. Press the key.
3. Make your announcement then hang up
Note: You can also make an Intercom call from a Cordless Phone
to only the other Cordless Phones associated with the same
Cordless Transmitter by pressing the OK button, scrolling to the
Intercom icon , pressing OK , selecting “All Handsets” and
then pressing OK again.
Calling a Contact
Since contacts may have more than one number listed, the number
set as the default is dialed unless you specify otherwise.
To call a contact in the Contacts List and dial the default number for
that contact, do the following.
1. In Idle mode, press OK to display the Main Menu.
2. Select Contacts and press OK
3. Select a contact from the Contacts List to call, and then
press the green key.
The phone dials the default phone number assigned to that contact.
If you want to dial one of the other numbers for the contact instead
of the default number, do the following.
1. In Idle mode, press OK to display the Main Menu.
2. Select Contacts and press OK
3. Select a contact from the Contacts List to call, and press
OK
4. Select a phone number from the list of numbers for that
contact, and then press the Green key .
Calling from the Call Log
To call from an entry in the Call Log, do the following.
1. In Idle mode, press OK to display the Main Menu.
2. Select Call Log and press OK (or In Idle mode,
press the Call log softkey).