Owner`s manual

AccessLine Communications
Owner’s Manual AccessLine 8-23-11
29
Connect all cables to the jacks on the phone, and then mount the
phone's holes (5 top, 6 left and 7 right) to the screws on the wall.
Step F Under the hook switch, find and press the cradle latch (8) to
let it down. Then hang up the handset and re-attach the curled cord.
Installing Cordless Phones
Cordless Phones can be installed in the following ways
Cordless Phones can be used with or without the Optional
Base Unit
You may use up to 3 Cordless Phones per Cordless
Transmitter.
Connecting the Cordless Transmitter:
1. Open the Cordless Transmitter box and remove the Cordless
Transmitter, Power Adapter, and black Ethernet cable.
Connect one end of the black Ethernet cable to the LAN connector
on the rear of the Cordless Transmitter.