Owner`s manual

AccessLine Communications

Owner’s Manual AccessLine 8-23-11

Option 3: Connect up to 4 phones directly to the Base Unit.

Use the included phone cord and connect one end into the port on

the back of the phone labeled and connect the other end into

one of the four green phone ports on the back of the base unit.

Option 4: Connect phones wirelessly within 40’ using the

Wireless Adapter

The wireless adapter allows a desk phone to be used without a cord

connecting it to the base unit. The range of the wireless adapter is

40 feet from the base unit.

The wireless adaptor has its own power supply. Plug the phone‟s

power cord into the short “power in” cord on the wireless adapter

and then into the wall outlet. Then,

1. Plug the included LAN cable into the Wireless Adapter

2. Plug the other end of the LAN cable into the back of the

phone using the port.

3. Plug the Wireless Adapter long power cord into an outlet

Note

To avoid interference or static on the phone, place the Wireless

Adapter away from the phone as shown.

To the Base Unit

From the phone