Owner`s manual

Owner’s Manual
27
8. Press the Up or Down soft keys to increase or decrease the backlight
intensity.
9. Press the Ok or Cancel soft keys to accept or cancel changes.
10. Press to return to the idle display.
Enabling the Headset Memory Mode
This feature is especially useful for permanent or full-time headset users.
To permanently enable the Headset Memory Mode:
1. Press .
2. Select Settings > Basic > Preferences > Headset... > Headset
Memory...
3. Use or to select Enabled, and then press the Select soft key.
4. Press to return to the idle display.
Repeat steps 1 to 4 to select Disabled and turn Headset Memory Mode off.
T o activate Headset Memory Mode:
Press twice.
The flashing headset icon on the graphic display or a flashing headset key