User Manual

CONFIG MENU PARAMETER
Value Meaning
To Edit Buffer Incoming bank data is not stored, but is treated as a series of individual programs. These
will appear sequentially in the edit buffer – useful for trying out sounds without having to
overwrite an entire bank.
Verify Incoming bank data is compared with the memory in the Virus, after which a status
message appears. Use this setting to check whether a bulk dump has been successful.
MIDI Dump TX
Transmit  MIDI Dump
Transmits various types of system exclusive data to an external device e.g. a computer or another Virus.
Value Meaning
ingle Buffer The contents of the single Edit buffer i.e. the current ingle program (or Part without the
Multi settings). This function is also available in the TORE menu for easy access.
ingle Bank A All 128 programs in Bank A.
ingle Bank B All 128 programs in Bank B.
ingle Bank C All 128 programs in Bank C.
ingle Bank D All 128 programs in Bank D.
Controller Dump A ingle program, but in the form of a succession of individual parameter changes.
These can take the form of MIDI CCs, Polypressure or ysex, depending on the value of
two other parameters. The Controller Dump setting is mainly used for updating the data
in parameter-based editors (e.g. a Logic environment) and can be relatively slow.
Arrangement All 16 sounds in the current Multi buffer or equencer mode buffer plus the additional
“multi” settings.
Multi Bank All Multi programs.
MIDI Control: Governs how Page A and Page B parameters are handled during MIDI communication with
e.g. a computer or MIDI controller unit. Note that system exclusive data is always recognized, irrespective of
the settings here.