User Manual

PARAMETER REFERENCE MANUAL88
Multi Prog. Change 
Disabled, Enabled: Species whether the MIDI message “Program Change” will switch the entire Multi Mode
program if received on the global MIDI channel.
MIDI  Clock
Value Meaning
Internal ync Any received MIDI Clock will be ignored. An internally generated clock is used instead.
ync to External Received MIDI Clock will be recognized. This is the standard setting.
end Internally generated MIDI Clock is sent to the MIDI output.
MIDI Dump RX
 Receive Dump
The Virus automatically recognizes the type of data appearing at its MIDI input. Whenever individual pro-
grams are received, they will appear in the Edit Buffer (see glossary), and must be explicitly stored. There-
fore, the following options only apply when receiving entire bank.
Apart from the Snow, all Viruses so far had banks each holding 128 patches. To maintain compatibility,
the Snow uses 2 banks of each 64 patches to load a Bank Dump. Use Virus Control and the Virus Control
Center to overwrite specic patches, banks or ROM locations.
Value Meaning
Disable Program data arriving at the MIDI input will be ignored.
Enable Bank data (128 sounds) will be stored to the Bank from which it was originally dumped,
regardless of which bank is currently selected.
Force To Bank A+B Bank data is always stored in bank A and B
Force To Bank C+D Bank data is always stored in bank C and D
Force To Bank E+F Bank data is always stored in bank E and F
Force To Bank g*h Bank data is always stored in bank G and H