User Manual

MULTI MODE PARAMETER
Multi Mode Parameters
In earlier Virus models, Multi mode programs consisted of multiple Parts, each one referencing a Single
program. The downside: Multi programs depended on the location of all their referenced Singles, so if you
changed any program while working in Single mode, Multi programs would change accordingly.
In the Virus TI Snow however, each of the 4 Parts actually contains the equivalent of a Single program. Parts
also require a few additional parameters (e.g. transposition, keyboard range) which are all accessed via
MULTI EDIT
Multi Patch
The Bank and Program parameters in the rst page are used to copy existing Singles into the current Part.
 Part Enable
Off, On: Species whether the selected Part is active.
Bank
A to Z: Selects the bank from which a Single program is automatically copied into the current Part.
Program
0 to 127: Selects the Single program to be automatically copied into the current Part.
Volume
-64 to +63: Bipolar parameter for balancing levels between different Parts.