User Manual

PARAMETER REFERENCE MANUAL66
Attack •
0 to 127: Accessible from the panel via the lter ATTACK knob. Reaction time to sudden peaks in the input
signal level. Used to regulate how smooth the resulting envelope will be.
Modulation destination “Filter Env Attack“.
Release •
0 to 127: Accessible from the panel via the lter DECAY knob. Reaction time to sudden drops in the input
signal level. Used to regulate how smooth the resulting envelope will be.
Modulation destination “Filter Env Decay“.
Sensitivity •
0% to 100%: Accessible from the panel via the lter SUSTAIN knob. Controls the sensitivity of the envelope
follower to its input signal (note that this parameter does not directly affect signal level). The standard value is
50%.
Modulation destination “Filter Env Sustain“.
Input Ring Modulator
The source specied by the Input Select parameter can be ring-modulated with the oscillator signal.
Mix •
Off, 1 to 63, Ringmod, 65 to 126, Input: “Off” means no input ring modulation, other values determine the
balance between the two signals: “1” is mostly the untreated oscillator signal, “Ringmod” is the ring-modu-
lated signal only, and “Input” is the input signal only.