User Manual

PARAMETER REFERENCE MANUAL64
Mod Q •
0 to 127: Quality (steepness) of the Modulator bands.
Modulation destination “Filter2 Resonance“.
Center Freq •
-64 to +63: Centre frequency of the Carrier bank.
Modulation destination “Filter1 Cutoff“.
Balance •
-64 to +63: Balance between the carrier and modulator signals. For pure vocoder signal, set this value to
<0>.
Modulation destination “Filter Balance“.
Mod Offset •
-64 to +63: Centre frequency offset of the modulator bank relative to the carrier bank.
Modulation destination “Filter2 Cutoff“.
Carrier Attack •
0 to 127: Attack time of the carrier’s own “envelope follower”. Together with Carrier Release, this is used to
smoothen the vocoded signal.
Carrier Release •
0 to 127: Release time of the carrier’s envelope follower. Together with Carrier Attack, this is used to
smoothen the vocoded signal.
Spectral Balance •
0 to 127: Balance between high and low frequencies in the vocoded signal. In effect, this parameter works
like a simple equalizer, determining the overall colour of the vocoder output. Higher values can improve the
clarity of speech.
Modulation destination “Filter Env Slope”.
Bands •
1 to 32: The number of lter bands used. The higher this number, the higher the quality (e.g. speech be-
comes more intelligible). Lower values are better for robot voices etc..
Modulation destination “Filter Env Release”.