User Manual

PARAMETER REFERENCE MANUAL56
Delay • Time
0.0 ms to 693.6 ms: Non-synchronized delay expressed in milliseconds. This values is used if Clock (see
above) is set to Off.
Modulation destination “Delay Time”.
• Feedback
0 to 127: For repeated delays. Determines how much of the output signal is fed back into delay input, affect-
ing the number of audible repeats.
Modulation destination “Delay Feedback“.
Coloration •
-64 to +63: Applies progressive ltering within the feedback path (see “Feedback” above). Negative values
make repeats successively mellower, whereas positive values make them brighter. Modulation destination
“Delay Coloration”. The Delay effect has its own dedicated LFO for modulating the delay time. Note that this
can cause interesting pitch modulation and stereo effects.
Mod Rate •
0 to 127: The speed of the delay LFO.
Modulation destination “Delay Mod Rate“.
Mod Depth •
0 to 127: The amount of modulation applied to Delay Time by the delay’s own LFO. Note that the left and
right channels are affected differently, so this parameter can be used to create stereo effects.
Modulation destination “Delay Mod Depth”.
Mod Shape •
Sine, Triangle, Sawtooth, Square, S&H, S&G: The delay LFO’s waveform. Use S&G for “tape echo” type ef-
fects.
Reverb
In the signal path, delay and reverb are routed in series i.e. the dry signal plus any delay is sent to the reverb
input.