User Manual

MOD MATRIX PARAMETER
Mod Matrix Parameters
The MOD menu contains all the parameters for the LFOs (Low Frequency Oscillators) and the Modulation
Matrix. You can use a wide variety of modulators to apply dynamic changes to the sound, such as vibrato or
tremolo effects, automated sweeps etc.
The modulation matrix is used for custom control routing. Six sources can be routed to three destinations
each. Available sources include the internal envelopes and LFOs as well as most MIDI controllers, channel
pressure (aftertouch) etc.. The list of destinations includes almost every Single Mode parameter in the Virus.
The information below applies to any slot in the matrix.
Source •
Off, Pitch Bend ... Random: Species the modulation source (envelopes, LFOs, MIDI controllers etc.). This
source can be simultaneously routed to a maximum of three destinations per slot.
Amount •
-64 to +63: Modulation amount for the specied destination. The range is bipolar so that modulation can be
inverted, and amounts are internally doubled so that unipolar destinations can be modulated over their entire
range (i.e. 128 values). The Amount itself can be controlled by another modulation source - modulation des-
tination is e.g. “Slot4 Amount2”.
• Destination
Off ... Wavetable 2 Index: Species a destination parameter.