User Manual

ENVELOPE
Envelopes
Note that the lter envelope generator can also be used for other purposes by setting Filter Envelope as
source in the Matrix.
Filter Envelope
Attack •
0 to 127: The time it takes for the lter envelope to rise from 0 to maximum.
Decay •
0 to 127: The time it takes to fall from maximum to the Sustain level (see below).
Sustain •
0 to 127: The nominal level after the Decay.
Sustain Slope •
-64 to +63: Negative values cause the sustain phase to decay to zero, positive values cause it to rise to
maximum.
Release •
0 to 127: Starts as soon as a note is released - the time it takes to fall from the current level to zero.
Amp Envelope
Attack •
0 to 127: The time it takes for the amplier envelope to rise from 0 to maximum.
Accessible from the panel via the lower ATTACK knob.