User Manual
OCILLATOR
Semitone •
-48 to +48 semitones: Adjust the pitch of oscillator 1 in semitones. Modulation destination “Osc1 Pitch“.
Key Follow •
-64 to +31, Norm, +33 to +63: How much the pitch of oscillator 1 follows the keyboard (i.e. MIDI note
number). Press both VALUE buttons at the same time for normal tuning (Norm).
Balance •
-64 to +63: Adjusts the relative levels of oscillator 1 and oscillator 2 (including FM), whereby -64 is oscilla-
tor 1 only and +63 is oscillator 2 only. Note that this parameter is mirrored in the oscillator 2 menu.
Common
The Common pages contain parameters which affect more than one oscillator at the same time.
Initial Phase •
Value Meaning
Off The phase angle (see glossary) of each oscillator is reset to a random value at the start of each note.
This closely emulates the “free-running” oscillators found in real analogue synthesizers.
1 to 127 The phase angle of oscillator 1 is xed at 0°, oscillator 2 phase is shifted forward, oscillator 3 phase is
shifted backwards by the same amount. Because it ensures that the “click”at the start of notes always
sound the same, setting the Initial Phase to a value other than Off is particularly useful for percussive
sounds.
Modulation destination “Osc Initial Phase”.
Key Mode •
Value Meaning
Poly Polyphonic
Mono 1 Monophonic, multi-trigger, full portamento
Mono 2 Monophonic, multi-trigger, legato portamento
Mono 3 Monophonic, single-trigger, full portamento
Mono 4 Monophonic, single-trigger, legato portamento