User Manual
PARAMETER REFERENCE MANUAL14
a unique mix of the two nearest waves, resulting in a smooth morphing of the timbre as you sweep the Index
position.
With Interpolation at zero position, the waves are blended as smoothly as possible, with the mid-point
between each wave representing a 50/50 mix of the two nearest waves. As you increase the value, an in-
creasingly large “dead-zone” is created between each of the original waves, and the blend rate is increased
accordingly until, at the maximum value (127), a stepping effect is achieved.
The net result is a very different characteristic from when the waves are blended smoothly, in two very impor-
tant ways: rstly, that slow LFO modulations of Wavetable Index will generally result in a somewhat rhythmic
effect that is difcult to achieve by other means, and secondly, the original waves will be presented much
more distinctly, and may often appear much brighter as a result (not that they are, mind - it’s just that pin-
pointing the exact value out of 128 possibilities at which a wave is not blended with any other, can be rather
tricky!)
Interpolation is also available as a destination in the Mod Matrix (Osc1/2 Interpolation).
Semitone •
-48 to +48 semitones: Adjust the pitch of oscillator 1 in semitones. Modulation destination “Osc1Pitch“.
Key Follow •
-64 to +31, Norm, +33 to +63: How much the pitch of oscillator 1 follows the keyboard (i.e. MIDI note
number). Press both VALUE buttons at the same time for normal tuning (Norm).
Balance •
-64 to +63: Adjusts the relative levels of oscillator 1 and oscillator 2 (including FM), whereby -64 is oscilla-
tor 1 only and +63 is oscillator 2 only. Note that this parameter is mirrored in the oscillator 2 menu.
Modulation destination “Osc Balance”.
Oscillator 1 (Wavetable PWM Oscillator)
The WavePWM oscillator takes two instances of the same wavetable, and phase-shifts them against each
other to achieve an effect reminiscent of the traditional pulsewidth modulation of a pulse wave oscillator.
Mode •
Classic, HyperSaw, WaveTable etc.: Selects the basic type of oscillator.
Index •
This determines the playback position within the currently selected Wavetable. Each of the 128 available val-
ues represents either a particular wave or the interpolation of the two nearest waves. Modulating the Index of