Specifications

 QUICKSTARTMANUAL26
OSC 1 Menu (HyperSaw Oscillator)
For this walkthrough dial up the patch “Tutorial 2” (RAM8 8-2). This is a basic patch using the HyperSaw
oscillator.
SoftKnob Parameter Meaning
#1 Density UseDensitytodeterminethenumberofsawspervoice-anythingfrom1up
to9!
#2 LocalDetune UseLocalDetunetodeterminethelevelofdetuningbetweenthesaws.At
zero,thesawswillbeinperfecttune,andphase-cancellationwilloccuras
aresult(thisisnormallyundesirable)andatthemaximumvalueof127,the
sawswillbedetunedbyasemitone.
#3 OscBalance ThisdeterminesthebalancebetweentheoutputsofOscillator1and
Oscillator2.Atcentreposition(default),youwillhearbothoscillators.Adjust
towards-64tohearjusttheoutputofOscillator1,andtowards+63tohear
justtheoutputofOscillator2.
OSC 1 Menu (Wavetable Oscillator)
For this walkthrough dial up the patch “Tutorial 3” (RAM8 8-3). This is a basic patch using the Wavetable
oscillator.
SoftKnob Parameter Meaning
#1 Index AdjustIndextosweepthroughthewavetable.
#2 Interpolation UseInterpolationtodeterminehowsmoothlyyoucansweepthroughthe
wavetable.Trysettingthisat127,andhaveanotherplaywithIndexon
Value1.Moderatevaluescanyieldanice,‘bumpy’effect.
#3 OscBalance ThisdeterminesthebalancebetweentheoutputsofOscillator1and
Oscillator2.Atcentreposition(default),youwillhearbothoscillators.Adjust
towards-64tohearjusttheoutputofOscillator1,andtowards+63tohear
justtheoutputofOscillator2.
OSC 1 Menu (Formant Complex Oscillator)
For this walkthrough dial up the patch “Tutorial 4” (RAM8 8-4). This is a basic patch using the Formant Com-
plex oscillator.