Specifications

MODUSOPERANDI
To select the desired Bank, rst press the BANK button. The Virus will now prompt you to select a patch
bank. Alternatively, you can hold the BANK button down and select the desired bank without this screen ap-
pearing.
Now press any of the top row of buttons, labelled ROM 1-8 to select a ROM bank, or one of buttons la-
belled RAM 1-8 on the bottom row to select a RAM bank.
Now the bank has been selected, choose the specic preset by simply typing the patch number using the
upper row for the rst digit and the lower row for the second.
The patches within each bank are numbered like this:
1-1 to 1-8, 2-1 to 2-8, 3-1 to 3-8, 4-1 to 4-8, 5-1 to 5-8, 6-1 to 6-8, 7-1 to 7-8, 8-1 to 8-8
Tip: It is only necessary to press BANK if you actually need to select a different bank. Once you are in the
bank you wish to browse, you can directly select each of the 8 presets in each ‘batch’ with the lower row,
and select a different batch with the upper row. As an example, let’s select the patch ‘Tutorial 1’, which is
located in RAM8 8-1.
Why not have a try on your own rst? Solution below. In case your stuck, here’s how to do it’:
Press BANK -> Lower Row 8 -> Upper Row 8 -> Lower Row 1
Selecting Multi Presets •
Since there is only one bank of 64 Multis, it is not necessary to select a Bank rst; apart from this the pro-
ceedure is exacly the same as in Single mode.
To select which Single preset you want to assign to a particular Part, you need to press EDIT followed by
Multi, and then select the preset using the Bank and Program parameters.