Specifications

ACCESS VIRUS RACK 133
Edit Section/Menu
BEND DOWN Determines the interval of
the bend when the Pitch Bender is
moved downwards to the full extent of
its range. Control range: -64 semitones
to +63 semitones.
01111111111111111112
1 COMMON
BendDown -2≤
61111111111111111154
[XP] BEND SCALE Determines the shape
of the curve which in turn determines
the effect of the Pitch Bend data. You
can chose from:
 LIN Starting from the 0 value, (center
position) the pitch bend is linear. In
other words, when you bend the pitch
up to exactly half the distance of the
pitch bend’s full range, the interval you
hear is equivalent to exactly half of the
value you set for BEND UP (see para-
graph above).
 EXP Starting from the 0 value (center
position) the pitch bend is exponential -
at first the bend is gradual and as you
move further away from the center posi-
tion, the pitch is bent ever more radi-
cally. In this mode you can achieve slight
fluctuations in pitch, for instance a man-
ual vibrato, provided you can maintain a
soft touch, yet still have the option of
generating greater intervals because of
the exponential increase in range.
01111111111111111112
1 COMMON
BendScale Exp≤
61111111111111111154
[XP] SMOOTH MODE This is an adaptive
parameter smoothing mode (Adaptive
Control Smoothing). You’ll find a
detailed explanation of this parameter
in “Notes on Adaptive Parameter
Smoothing” on page 173.
You have the following options to chose
from:
 OFF Adaptive Control Smoothing is dis-
abled and parameter changes are carried
out incrementally without smoothing.
 ON Adaptive Control Smoothing is
enabled and parameter changes are
smooth.
 AUTO Adaptive Control Smoothing
analyzes the characteristics of the incom-
ing in parameter changes and carries out
these out either continuously
(smoothed) or incrementally.
 NOTE Adaptive Control Smoothing is
carried out continuously (smoothed), but