User Manual

PARAMETER REFERENCE MANUAL40
Mode •
Mode Meaning
Low Pass LP. Allows frequencies below the cutoff point to pass through i.e rejects those above the cutoff
point.
High Pass HP. Allows frequencies above the cutoff point to pass through i.e. rejects those below the cutoff
point.
Band Pass BP. Allows frequencies close to the cutoff point to pass through i.e. simultaneously rejects those
above and below the cutoff point.
Band top B. Rejects frequencies close to the cutoff point (within a certain “band”) i.e. allows frequencies
above or below the cutoff point to pass through. Note that Resonance effectively narrows this
band, making the effect less obvious.
Note that lter 2 does not offer “analog” modes.
Key Follow •
0 to 127: How much cutoff 2 follows the MIDI note and pitch bender.
Modulation destination “Filter2 Key Follow”.
Env Polarity •
Positive, Negative: The effect of Env Amount on lter 2 cutoff can be inverted by setting this parameter to
Negative.
Common
Routing •
Mode Meaning
erial 4 The lters are routed in series, with 2 poles each.
erial 6 The lters are routed in series, lter 1 has 4 poles and lter 2 has 2 poles.
Parallel 4 The lters are routed in parallel with 2 poles each.