® 7” LCD Television Owner’s Manual Model: PTV 7000 READ THESE OPERATING INSTRUCTIONS CAREFULLY SAVE THESE INSTRUCTIONS For product questions or service, CALL 1-919-585-6435 or go to www.AccessHD.
Replacement Parts and Accessories Part Name Part Number Price TV Antenna TVAnt $24.99 TV Remote RCD-TV $19.99 PowSup9V $14.99 BattTV $29.99 BattTV-ext $39.99 12V Car Charger Adapter CarChrg $19.99 Mounting Bracket MtBrack $24.99 Power Supply TV Battery-1200mHa (1 hr life) TV Extended Life Battery (2.5 hr life) Upgrade for a longer battery life To place an order: Visit www.AccessHD.
Contents: Important Safety Instructions ....................................1 Component Identification ..........................................2 Operating Instructions ...............................................3 Getting Started ..........................................................5 TV Setup Menu Settings ...........................................5 Mounting Options ......................................................8 Troubleshooting ........................................................
Important Safety Instructions Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with a dry cloth. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
Component Identification Front View 1. LCD Screen 2. Speakers 3. Remote Sensor 1 3 2 Bottom View 1. Power Indicator 2. Battery Charging Indicator 1 2 Left View 1 2 3 4 1. Video In 2. Left Audio In 3. Right Audio In 4. Headphone Jack Right View 1. DC In 2. Power Switch 3. Mode 4. Volume + 5. Volume – 123456789 6. Auto/OK 7. Channel + 8. Channel – 9. Menu Rear View 1 2 1. Antenna 2. Mounting Holes 3. Viewing Stand 4.
Remote Control Buttons 1 2 3 4 5 9 11 6 8 7 12 13 10 14 16 15 1. Power 9. Volume – 2. Mode 10. Enter 3. Mute 11. Menu 4. MTS 12. Exit 5. Zoom 13. Previous 6. Channel + 14. Guide 7. Channel – 15. Info 8. Volume + 16. CC Operating Instructions Do not connect the power supply until all connections have been made. Powering the Unit There are two ways to power this device. AC Adapter A standard PSU is included with the unit.
Connecting to External AV Sources The unit supports an AV signal input function. Use the audio/ video cable to connect the unit to an external audio/ video signal source such as a DVD player, VCR, etc. Be sure to observe the color code when connecting audio/video cables. (Cables not included.) Note: Noise may occur in speakers when there is an external audio signal input while playing a DVD. Unplug the audio cord to clear the noise. Connecting Headphones Plug headphones into the headphones jack.
Getting Started Follow these steps the first time you use this unit: 1. Retrieve the remote control from the storage slot located on the back panel behind the viewing stand. 2. Connect the PSU to the DC jack on the TV and plug it into a power socket. 3. Extend the antenna or connect an external antenna. You can also remove the antenna and plug in an analog cable (in that case you can skip Steps 5 and 6). 4. Turn the TV power on. 5.
Audio Setting Sound Mode Press the button to select Personal, Standard, Movie or Music. Treble, Bass, Balance Press the button to adjust the value. Audio Language Press the button to select English, French or Spanish. Press the Menu button to return to the previous menu. Press the Menu button again to exit the TV SETUP menu. Time Settings OSD Duration Press the button to set the desired time the menu will be displayed on the screen. Sleep Timer Press the button to select On or Off.
Closed Caption Press the button to enter the Closed Caption submenu. 1. CC Mode Press the button to select Off, On or CC on Mute. Press the Menu button to return to the previous menu. 2. Basic Selection Press the button to select CC1, CC2, CC3, CC4, Text1, Text2, Text3 or Text4. Press the Menu button to return to the previous menu. 3. Advanced Selection Press the button to select Service1, Service2, Service3, Service4, Service5 or Service6. Press the Menu button to return to the previous menu.
2. Start to Scan Press the button to start the scanning. The unit will automatically memorize the programs searched in sequence and tune the first searched channel. During scanning, press the Menu button to cancel the scan and exit. Show/Hide Press the button to enter the Show/Hide submenu. Press the button to select the channel setting you want to change. Press the button to select Show or Hide. Press the Menu button to exit the submenu. Channel No.
Troubleshooting Symptom: There is no sound. Check that the system connections are correct. Make sure the speakers are not muted. In the TV mode, set the correct sound mode. Symptom: There is no picture or the picture is unsteady. Make sure the power adapter is correctly connected. Check that connections with external AV signal sources are correct. Check that settings in the Picture menu are correctly set. Check that the video type input signal is corresponding to the unit.
Limited Warranty & Service To Qualify for this Warranty The product must be purchased in the United States or Canada from a retailer authorized by AccessHD, LLC to sell this product. This warranty applies only to the first retail purchaser/ owner during the applicable warranty time period.