Quick Guide
Table Of Contents
7
Knock the plastic rivets
into the guide holes and
ensure that they are
tightened up.
4.
Screw the locknut to loosen the universal joint before attaching your camera to
the wall.
5.
Mount your camera onto the wall and connect all cables.
Lead tapping screwsthrough
the guide holes in the base
and fix them on the wall by
using ascrewdriver.
6.
Attach the rubber sheath to the antenna.
7.
Rotate the antenna to the antenna interface according to clockwise direction.
Antenna Interface
Rubber Sheath
Locknut