Quick Guide

9
NOTE!
 DHCP is enabled by default. If a DHCP server is used in your network, your
camera may be assigned an IP address, and you need to use the assigned IP
address to log in.
 You may need to install a plug-in at your first login. Please follow the on-screen
instructions to complete the installation and then open the browser again to log
in.
 The default password is intended only for your first login. To ensure security,
please change the password after your first login. You are strongly
recommended to set a strong password of at least nine characters including all
three elements: digits, letters and special characters.
 If the password has been changed, please use the new password to log in.