Manualshelf

Installation Sheet

ManualsBrandsAccess Lighting ManualsCeiling FixturesAccess Lighting Meteor 9 Light LED Flush Mount Ceiling Fixture
12
2
4
2
CERTIFICATION: cETL DAMP NO. 70080LED/70081LED/70082LED
3
MOUNT THE CANOPY
Fit the fixture canopy up to the crossbar. Insert the
hanging screws into the designated holes in the canopy.
Secure with the supplied thumb screws.
INSTALL THE ACRYLIC SHADE
Hold the acrylic shade and push inward and up over to
the canopy.
RESTORE THE ELECTRICITY AND
CHECK THE OPERATION OF YOUR
NEW ACCESS FIXTURE
CONNECT THE WIRES
Connect the black supply wire to the black fixture wire.
Secure with the supplied wire nuts. Connect the white
supply wires to the white fixture wire. Secure with the
supplied wire nuts. Either wrap the green wire around
one of the protruding screws or connect it to the supply
ground wire. Secure all wires with U.L. Certified electrical
tape (not supplied).
Tuck all wires carefully into the J-Box.