Instructions / Assembly

PREPARE FIXTURE AND ATTACH MOUNTING
BRACKET
If there is an existing fixture remove it. Expose the supply
wires from the J-box. Gently pull the supply wires through
the center of the mounting bracket. Secure the mounting
bracket to the J-box with the supplied screws and drywall
anchors. Connect the black supply wire to the black fixture
wire. Secure with the supplied wire nuts. Connect the white
supply wire to the white fixture wire. Secure with the supplied
wire nuts. Attach the green J-Box wire around green
hexagonal head screw or connect it to the green supply
grounding wire of the fixture. Secure all wires with electrical
tape (not supplied). Tuck all wires carefully into the J-Box.
1
WHAT YOU NEED
•
Screwdriver
• Wire Cutters
• Wiring Supplies as Specified
by Electrical Code
2
4
2
CERTIFICATION: cULus DAMP NO. 62581LEDDLP
3
MOUNT THE FIXTURE
Align the fixture onto the mounting bracket and
secure with the supplied screws.
INSTALL GLASS SHADES AND THE BULBS
Place the glass shades over the socket and onto the fixture
arm. Secure with the supplied socket cover and socket rings.
Insert the bulbs.
DO NOT EXCEED THE MAXIMUM WATTAGE AS
STATED ON THE WARNING LABEL
RESTORE THE ELECTRICITY AND
CHECK THE OPERATION OF YOUR
NEW ACCESS LIGHTING FIXTURE
Please ensure that the fitting is cool and
switched off before replacing the bulb.
DO NOT use bulbs that exceed the
maximum wattage, stated on caution label.
CAUTION
VER: 19.12.1