Instructions / Assembly

CERTIFICATION: cETLus DAMP NO.

62570LEDD/62571LEDD/62572LEDD/62573LEDD

VER: 20.03.1

PREPARE FIXTURE AND ATTACH MOUNTING

BRACKET

If there is an existing fixture remove it. Expose the supply wires

from the J-box. Gently pull the supply wires through the center

of the mounting bracket. Secure the mounting bracket to the J-

box with the supplied screws.

MAKE WIRE CONNECTION

Connect the black supply wire to the black fixture wire. Secure

with the supplied wire nuts. Connect the white supply wire to the

white fixture wire. Secure with the supplied wire nuts. Attach the

green J-Box wire around green hexagonal head screw or

connect it to the green supply grounding wire of the fixture.

Secure all wires with electrical tape (not supplied). Tuck all

wires carefully into the J-Box.

MOUNT FIXTURE

Align the fixture onto the mounting bracket and secure with the

supplied screws.

RESTORE THE ELECTRICITY AND

CHECK THE OPERATION OF YOUR

NEW ACCESS LIGHTING FIXTURE

If the fixture is to be removed or replaced,

please ensure that the electricity is

switched off and that the fitting is cool

before touching it.

CAUTION