Installation Sheet

PREPARE FIXTURE AND ATTACH MOUNTING
BRACKET
If there is an existing fixture remove it. Expose the supply
wires from the J-box. Gently pull the supply wires through
the center of the mounting bracket. Secure the mounting
bracket to the J-box with the supplied screws. Connect
the black supply wire to the black fixture wire. Secure
with the supplied wire nuts. Connect the white supply wire
to the white fixture wire. Secure with the supplied wire nuts.
Attach the green J-Box wire around green hexagonal head
screw or connect it to the green supply grounding wire of the
fixture. Secure all wires with electrical tape (not supplied).
Tuck all wires carefully into the J-Box.
1
WHAT YOU NEED
•
Screwdriver
• Wire Cutters
• Wiring Supplies as Specified
by Electrical Code
2
4
2
CERTIFICATION: cULus DAMP NO. 62300LEDDLP
3
MOUNT THE FIXTURE
Align the fixture onto the mounting bracket and
secure with the supplied screws.
INSTALL THE BULBS
Insert the bulbs.
DO NOT EXCEED THE MAXIMUM WATTAGE AS
STATED ON THE WARNING LABEL
RESTORE THE ELECTRICITY AND
CHECK THE OPERATION OF YOUR
NEW ACCESS LIGHTING FIXTURE
Please ensure that the fitting is cool and
switched off before replacing the bulb.
DO NOT use bulbs that exceed the
maximum wattage, stated on caution label.
CAUTION
VER: 20.03.1