Instructions / Assembly

ATTACH MOUNTING BRACKET AND MAKE
WIRE CONNECTION
If there is an existing fixture remove it. Expose the supply
wires from the J-box. Install the mounting bracket and
mount it to the J-Box with the supplied screws. Connect
the black supply wire to the black fixture wire. Secure
with the supplied wire nuts. Connect the white supply wire
to the white fixture wire. Secure with the supplied wire nuts.
Attach the green J-Box wire around green hexagonal head
screw or connect it to the green supply grounding wire of
the fixture. Secure all wires with electrical tape (not supplied).
Tuck all wires carefully into the J-Box.
MOUNT THE FIXTURE
Align the fixture backplate onto the the mounting bracket
and secure with the supplied screws.
1
WHAT YOU NEED
•
Screwdriver
• Wire Cutters
• Wiring Supplies as Specified
by Electrical Code
2
2
CERTIFICATION: cETLus DAMP NO. 62160LEDD
3
RESTORE THE ELECTRICITY AND
CHECK THE OPERATION OF YOUR
NEW ACCESS LIGHTING FIXTURE
If the fixture is to be removed or replaced,
please ensure that the electricity is
switched off and that the fitting is cool
before touching it.
CAUTION
VER: 20.01.1